Set a reference record
Click here to see this page in full context.
  1. >
  2. Chart and selection stages >
  3. Reference Record >
  4. Set a reference record

Set a reference record

This feature is not available with GRANTA EduPack 2020 Introductory.

There are several ways of setting a record as the reference record for the data table it belongs to. The result is the same with each method.

  1. Select a record and set it as the reference record
  2. Specify a reference record in a selection project
  3. Set a record in a comparison table as the reference record
  4. Note

Select a record and set it as the reference record

  1. Select the record name in any of the following:

    • Browse window
    • Search: Results window
    • Chart Stage window
    • Select: Results window

  2. Right-click and select Set as Reference from the context menu.

Specify a reference record in a selection project

In the Selection Data pane of the Select window:

  1. Click the Set button.

  2. In the Choose reference record dialog, browse to a record and select it, then click OK.

Set a record in a comparison table as the reference record

In the Comparison Table window:

  1. Hover over the name of a record in the top row of the comparison table

  2. Click the pop-up Set as Reference Set as Reference button.

Note

The new reference record replaces any existing reference record for the data table.