Export to ANSYS Workbench
Only compatible with ANSYS Workbench v12 onwards.
The following attributes can be exported to ANSYS, depending on which
record
you are exporting
, and which model you select:
- Density
- Poisson's ratio
- Specific heat capacity
- Specific heat capacity with temperature
- Young's modulus
- Young's modulus with temperature
- Yield strength (elastic limit)
- Yield strength (elastic limit) with temperature
- Tensile strength (ultimate)
- Tensile strength (ultimate) with temperature
- True stress with strain
- Tangent modulus
- Thermal conductivity
- Thermal conductivity with temperature
- Thermal expansion coefficient
- Thermal expansion coefficient with temperature
- Reference temperature, CTE
- Electrical resistivity
- Magnetic B-H curve