Exporter settings
Specify additional settings when exporting data from GRANTA EduPack.
When using the CAD/CAE exporters in GRANTA EduPack, the Export dialog box may contain extra settings specific to the record and data set combination:
- Model: select the model appropriate for your CAD/CAE package.
- Unit: select the unit system to use with the property values.
- Scaling factor: scale the exported modulus and strength values to account for performance differences between test data and real components. Default value is 1 (no scaling).
- Poisson's ratio: this value is populated using information on the record datasheet, if available, or you can enter a custom value.
- Failure criterion: select the appropriate criteria for your analysis.